EI2251 INDUSTRIAL INSTRUMENTATION – I SYLLABUS | ANNA UNIVERSITY BE E&I 4TH SEM SYLLABUS REGULATION 2008 2011 2012-2013 BELOW IS THE ANNA UNIVERSITY FOURTH SEMESTER BE ELECTRONICS AND INSTRUMENTATION ENGINEERING DEPARTMENT SYLLABUS, TEXTBOOKS, REFERENCE BOOKS,EXAM PORTIONS,QUESTION BANK,PREVIOUS YEAR QUESTION PAPERS,MODEL QUESTION PAPERS, CLASS NOTES, IMPORTANT 2 MARKS, 8 MARKS, 16 MARKS TOPICS. IT IS APPLICABLE FOR ALL STUDENTS ADMITTED IN THE YEAR 2011 2012-2013 (ANNA UNIVERSITY CHENNAI,TRICHY,MADURAI,TIRUNELVELI,COIMBATORE), 2008 REGULATION OF ANNA UNIVERSITY CHENNAI AND STUDENTS ADMITTED IN ANNA UNIVERSITY CHENNAI DURING
EI2251 INDUSTRIAL INSTRUMENTATION – I L T P C
(Common to EIE & ICE) 3 0 0 3
AIM
To equip the students with relevant knowledge to suit the industrial requirements.
OBJECTIVES
To provide sound knowledge about various techniques used for the measurement of industrial
parameters.
Discussion of load cells, torque meter and various velocity pick-ups.
Exposure to various accelerometer pick-ups, vibrometers, density and viscosity pick-ups.
To have an adequate knowledge about pressure transducers.
To have an idea about the temperature standards, calibration and signal conditioning used in
RTD’s.
To have a sound knowledge about thermocouples and pyrometry techniques.
UNIT I MEASUREMENT OF FORCE, TORQUE AND VELOCITY 9
Electric balance – Different types of load cells – Hydraulic, pneumatic strain gauge- Magneto elastic
and Piezo electric load cell – Different methods of torque measurements: strain gauge-Relative
angular twist-Speed measurement:-Capacitive tacho-Dragcup type tacho-D.C and A.C
tachogenerators – Stroboscope.
UNIT II MEASUREMENT OF ACCELERATION, VIBRATION AND DENSITY 9
Accelerometers:- LVDT, Piezo-electric, Strain gauge and Variable reluctance type accelerometer –
Mechanical type vibration instruments – Seismic instruments as an accelerometer – Vibrometers :
Calibration of vibration pickups – Units of density and specific gravity – Baume scale, and API
scale- Pressure head type densitometers- Float type densitometers – Ultrasonic densitometer-
Bridge type gas densitometer.
UNIT III PRESSURE MEASUREMENT 9
Units of pressure-Manometers-Different types –Elastic type pressure gauges: Bourdon tube,
bellows and diaphragms-Electrical methods: Elastic elements with LVDT and strain gauges –
Capacitive type pressure gauge –Piezo-resistive pressure sensor-Resonator pressure sensor-
Measurement of vacuum:-McLeod gauge-Thermal conductivity gauges-Ionization gauges:– Cold
cathode type and hot cathode type-Testing and calibration of pressure gauges-Dead weight tester.
UNIT IV TEMPERATURE MEASUREMENT 9
Definitions and standards-Primary and secondary fixed points –Calibration of thermometers -
Different types of filled in system thermometer-Sources of errors in filled in systems and their
compensation-Bimetallic thermometers – Electrical methods of temperature measurement-Signal
conditioning of industrial RTDs and their characteristics-3 lead and 4 lead RTDs - Thermistors.
UNIT V THERMOCOUPLES AND RADIATION PYROMETERS 9
Thermocouples-Laws of thermocouple –Fabrication of industrial thermocouples –Signal
conditioning of thermocouple output-Isothermal block reference junctions – Commercial circuits for
cold junction compensation-Response of thermocouple –Special techniques for measuring high
temperature using thermocouples – Radiation fundamentals- Radiation methods of temperature
measurement –- Total radiation pyrometers-Optical pyrometers-Two colour radiation pyrometers –
Fiber optic temperature measurement.
L = 45 TOTAL : 45 PERIODS
35
TEXT BOOKS:
1. Doebelin, E.O., “Measurement systems Application and Design”, International Student Edition, 5th
Edition, McGraw Hill Book Company, 2004.
2. Jone’s Instrument Technology, Vol.2, Butterworth-Heinemann, International Edition, 2003.
3. A.K. Sawhney, ‘A course in Electrical & Electronic Measurements and Instrumentation’,
Dhanpath Rai & Co (P) Ltd, 2004.
REFERENCES:
1. Liptak, B.G., “Instrumentation Engineers Handbook (Measurement)”, CRC Press, 2005
2. Patranabis,D., “Principles of Industrial Instrumentation”, 2nd Edition, Tata McGraw Hill
Publishing Company Ltd., New Delhi, 1999.
3. Holman,P., “Experimental methods for Engineers”, 6th Edition, McGraw Hill Book Company,
2000.
4. Nakra, B.C., and Chaudry, K.K., “Instrumentation measurement and Analysis”, TataMcGraw Hill
publishing Company Limited, 2004.
EI2251 INDUSTRIAL INSTRUMENTATION – I L T P C
(Common to EIE & ICE) 3 0 0 3
AIM
To equip the students with relevant knowledge to suit the industrial requirements.
OBJECTIVES
To provide sound knowledge about various techniques used for the measurement of industrial
parameters.
Discussion of load cells, torque meter and various velocity pick-ups.
Exposure to various accelerometer pick-ups, vibrometers, density and viscosity pick-ups.
To have an adequate knowledge about pressure transducers.
To have an idea about the temperature standards, calibration and signal conditioning used in
RTD’s.
To have a sound knowledge about thermocouples and pyrometry techniques.
UNIT I MEASUREMENT OF FORCE, TORQUE AND VELOCITY 9
Electric balance – Different types of load cells – Hydraulic, pneumatic strain gauge- Magneto elastic
and Piezo electric load cell – Different methods of torque measurements: strain gauge-Relative
angular twist-Speed measurement:-Capacitive tacho-Dragcup type tacho-D.C and A.C
tachogenerators – Stroboscope.
UNIT II MEASUREMENT OF ACCELERATION, VIBRATION AND DENSITY 9
Accelerometers:- LVDT, Piezo-electric, Strain gauge and Variable reluctance type accelerometer –
Mechanical type vibration instruments – Seismic instruments as an accelerometer – Vibrometers :
Calibration of vibration pickups – Units of density and specific gravity – Baume scale, and API
scale- Pressure head type densitometers- Float type densitometers – Ultrasonic densitometer-
Bridge type gas densitometer.
UNIT III PRESSURE MEASUREMENT 9
Units of pressure-Manometers-Different types –Elastic type pressure gauges: Bourdon tube,
bellows and diaphragms-Electrical methods: Elastic elements with LVDT and strain gauges –
Capacitive type pressure gauge –Piezo-resistive pressure sensor-Resonator pressure sensor-
Measurement of vacuum:-McLeod gauge-Thermal conductivity gauges-Ionization gauges:– Cold
cathode type and hot cathode type-Testing and calibration of pressure gauges-Dead weight tester.
UNIT IV TEMPERATURE MEASUREMENT 9
Definitions and standards-Primary and secondary fixed points –Calibration of thermometers -
Different types of filled in system thermometer-Sources of errors in filled in systems and their
compensation-Bimetallic thermometers – Electrical methods of temperature measurement-Signal
conditioning of industrial RTDs and their characteristics-3 lead and 4 lead RTDs - Thermistors.
UNIT V THERMOCOUPLES AND RADIATION PYROMETERS 9
Thermocouples-Laws of thermocouple –Fabrication of industrial thermocouples –Signal
conditioning of thermocouple output-Isothermal block reference junctions – Commercial circuits for
cold junction compensation-Response of thermocouple –Special techniques for measuring high
temperature using thermocouples – Radiation fundamentals- Radiation methods of temperature
measurement –- Total radiation pyrometers-Optical pyrometers-Two colour radiation pyrometers –
Fiber optic temperature measurement.
L = 45 TOTAL : 45 PERIODS
35
TEXT BOOKS:
1. Doebelin, E.O., “Measurement systems Application and Design”, International Student Edition, 5th
Edition, McGraw Hill Book Company, 2004.
2. Jone’s Instrument Technology, Vol.2, Butterworth-Heinemann, International Edition, 2003.
3. A.K. Sawhney, ‘A course in Electrical & Electronic Measurements and Instrumentation’,
Dhanpath Rai & Co (P) Ltd, 2004.
REFERENCES:
1. Liptak, B.G., “Instrumentation Engineers Handbook (Measurement)”, CRC Press, 2005
2. Patranabis,D., “Principles of Industrial Instrumentation”, 2nd Edition, Tata McGraw Hill
Publishing Company Ltd., New Delhi, 1999.
3. Holman,P., “Experimental methods for Engineers”, 6th Edition, McGraw Hill Book Company,
2000.
4. Nakra, B.C., and Chaudry, K.K., “Instrumentation measurement and Analysis”, TataMcGraw Hill
publishing Company Limited, 2004.
No comments:
Post a Comment
Any doubt ??? Just throw it Here...