CC9212 FINITE ELEMENT ANALYSIS IN MANUFACTURING SYLLABUS | ANNA UNIVERSITY ME CAD/CAM 1ST SEM SYLLABUS REGULATION 2009 2011 2012-2013 BELOW IS THE ANNA UNIVERSITY FIRST SEMESTER M.E CAD/CAM DEPARTMENT SYLLABUS, TEXTBOOKS, REFERENCE BOOKS,EXAM PORTIONS,QUESTION BANK,PREVIOUS YEAR QUESTION PAPERS,MODEL QUESTION PAPERS, CLASS NOTES, IMPORTANT 2 MARKS, 8 MARKS, 16 MARKS TOPICS. IT IS APPLICABLE FOR ALL STUDENTS ADMITTED IN THE YEAR 2011 2012-2013 (ANNA UNIVERSITY CHENNAI,TRICHY,MADURAI,TIRUNELVELI,COIMBATORE), 2009 REGULATION OF ANNA UNIVERSITY CHENNAI AND STUDENTS ADMITTED IN ANNA UNIVERSITY CHENNAI DURING 2009
CC9212 FINITE ELEMENT ANALYSIS IN MANUFACTURING L T P C
ENGINEERING 3 0 0 3
AIM
The aim is to provide the students with knowledge of the finite element method that will be
of use in different manufacturing areas and to provide a foundation for further study.
OBJECTIVE
The objective is to equip students with fundamentals of finite element principles so as to
enable them to understand the behaviour of various finite elements and to be able to
select appropriate elements to solve physical and engineering problems with emphasis on
structural and thermal engineering applications.
UNIT I INTRODUCTION: 6
Basics of FEM – Initial value and boundary value problems – wighted residual Galerkin
ands Raleigh Ritz methods – review of Variational calculus – Integration by parts – Basics
of variational formulation.
UNIT II ONE DIMENSIONAL ANALYSIS: 10
Steps in FEA – Discretization, function – derivation of element characteristics matrix,
shape function, assembly and imposition of boundary conditions – solution and post
processing – One dimensional analysis in solid mechanics and heat transfer.
UNIT III SHAPE FUNCTIONS AND HIGHER ORDER FORMULATIONS 10
Global and Natural Co-ordinates – Shape functions for one and two dimensional
elements – Three noded triangular and four noded quadrilateral element – Non linear
analysis – Isoparametric elements – Jacobian matrices and transformations – Basics of
two dimensional axi symmetric analysis.
UNIT IV ANALYSIS OF PRODUCTION PROCESSES 10
FE Analysis of metal casting – Special considerations, latent heat incorporation, gap
element – time stepping procedures – Crank – Nicholson algorithm – Prediction of grain
structure - Basic concepts of plasticity – Solid and flow formulation – small incremental
deformation formulation – FE Analysis of metal cutting, chip separation criteria,
incorporation of strain rate dependency.
UNIT V COMPUTER IMPLEMENTATION 9
Pre Processing, Mesh generation, elements connectivity, boundary conditions, input of
material and processing characteristics – Solution and post processing – Overview of
application packages such as ANSYS and DEFORM – Development of code for one
dimensional analysis and validation.
TOTAL: 45 PERIODS
TEXT BOOKS:
1. Reddy, J.N, “An Introduction to the Finite element Method”, McGraw – Hill, 1985.
2. Rao, “Finite Element Method in Engineering”, Pergammon Press, 1989.
REFERENCES:
1. Bathe, K.J., “Finite Element Procedures in Engineering Analysis, 1990.
2. Kobayashi, S, Soo-IK-Oh and Altan, T, “Metal forming and the Finite
element Methods”, Oxford University Press, 1989.
3. Lewis, R.W., Morgan, K, Thomas, H.R., and Seetharaman, K.N., “The Finite Element
Method in Heat Transfer Analysis”, John Wiley, 1994.
CC9212 FINITE ELEMENT ANALYSIS IN MANUFACTURING L T P C
ENGINEERING 3 0 0 3
AIM
The aim is to provide the students with knowledge of the finite element method that will be
of use in different manufacturing areas and to provide a foundation for further study.
OBJECTIVE
The objective is to equip students with fundamentals of finite element principles so as to
enable them to understand the behaviour of various finite elements and to be able to
select appropriate elements to solve physical and engineering problems with emphasis on
structural and thermal engineering applications.
UNIT I INTRODUCTION: 6
Basics of FEM – Initial value and boundary value problems – wighted residual Galerkin
ands Raleigh Ritz methods – review of Variational calculus – Integration by parts – Basics
of variational formulation.
UNIT II ONE DIMENSIONAL ANALYSIS: 10
Steps in FEA – Discretization, function – derivation of element characteristics matrix,
shape function, assembly and imposition of boundary conditions – solution and post
processing – One dimensional analysis in solid mechanics and heat transfer.
UNIT III SHAPE FUNCTIONS AND HIGHER ORDER FORMULATIONS 10
Global and Natural Co-ordinates – Shape functions for one and two dimensional
elements – Three noded triangular and four noded quadrilateral element – Non linear
analysis – Isoparametric elements – Jacobian matrices and transformations – Basics of
two dimensional axi symmetric analysis.
UNIT IV ANALYSIS OF PRODUCTION PROCESSES 10
FE Analysis of metal casting – Special considerations, latent heat incorporation, gap
element – time stepping procedures – Crank – Nicholson algorithm – Prediction of grain
structure - Basic concepts of plasticity – Solid and flow formulation – small incremental
deformation formulation – FE Analysis of metal cutting, chip separation criteria,
incorporation of strain rate dependency.
UNIT V COMPUTER IMPLEMENTATION 9
Pre Processing, Mesh generation, elements connectivity, boundary conditions, input of
material and processing characteristics – Solution and post processing – Overview of
application packages such as ANSYS and DEFORM – Development of code for one
dimensional analysis and validation.
TOTAL: 45 PERIODS
TEXT BOOKS:
1. Reddy, J.N, “An Introduction to the Finite element Method”, McGraw – Hill, 1985.
2. Rao, “Finite Element Method in Engineering”, Pergammon Press, 1989.
REFERENCES:
1. Bathe, K.J., “Finite Element Procedures in Engineering Analysis, 1990.
2. Kobayashi, S, Soo-IK-Oh and Altan, T, “Metal forming and the Finite
element Methods”, Oxford University Press, 1989.
3. Lewis, R.W., Morgan, K, Thomas, H.R., and Seetharaman, K.N., “The Finite Element
Method in Heat Transfer Analysis”, John Wiley, 1994.
No comments:
Post a Comment
Any doubt ??? Just throw it Here...