ME2257 COMPUTER AIDED MACHINE DRAWING LAB SYLLABUS | ANNA UNIVERSITY BE MECHANICAL ENGINEERING 4TH SEM SYLLABUS REGULATION 2008 2011 2012-2013 BELOW IS THE ANNA UNIVERSITY FOURTH SEMESTER BE MECHANICAL ENGINEERING DEPARTMENT SYLLABUS, TEXTBOOKS, REFERENCE BOOKS,EXAM PORTIONS,QUESTION BANK,CLASS NOTES, IMPORTANT 2 MARKS, 8 MARKS, 16 MARKS TOPICS. IT IS APPLICABLE FOR ALL STUDENTS ADMITTED IN THE YEAR 2011 2012-2013 (ANNA UNIVERSITY CHENNAI,TRICHY,MADURAI,TIRUNELVELI,COIMBATORE), 2008 REGULATION OF ANNA UNIVERSITY CHENNAI AND STUDENTS ADMITTED IN ANNA UNIVERSITY CHENNAI DURING 2009
ME2257 COMPUTER AIDED MACHINE DRAWING LABORATORY L T P C
0 0 4 2
OBJECTIVE
To make the students understand and interpret drawings of machine components
so as to prepare assembly drawings either manually and using standard CAD
packages.
To familiarize the students with Indian Standards on drawing practices and
standard components.
DRAWING STANDARDS
Code of practice for Engineering Drawing, BIS specifications – Welding symbols, riveted
joints, keys, fasteners – Reference to hand book for the selection of standard
components like bolts, nuts, screws, keys etc.
2-D DRAWINGS
Limits, Fits – Tolerancing of individual dimensions- Specification of Fits- Manual
Preparation of production drawings and reading of part and assembly drawings.
CAD PRACTICE (USING APPLICATION PACKAGES)
Drawing, Editing, Dimensioning, Plotting Commands, Layering Concepts, Hatching,
Detailing, Assembly, basic principles of GD&T (geometric dimensioning & tolerancing)
ASSEMBLY DRAWING (MANUAL & USING APPLICATION PACKAGES)
Manual parts drawing and preparation of assembled views given part details for
components followed by practicing the same using CAD packages.
Suggested Assemblies:
Shaft couplings – Plummer block – Screw jack- Lathe Tailstock – Universal Joint –
Machine Vice – Stuffing box- safety Valves - Non-return valves- Connecting rod -Piston
and crank shaft- Multi plate clutch- Preparation of Bill of materials and tolerance data
sheet L=15, P= 45, TOTAL: 60 PERIODS
Use of standard CAD application packages is recommended from the point of view of
requirement by industries. However to encourage our national efforts in indigenous
development of software packages with focus on open source, students may be
encouraged to work with “CollabCAD Software”, developed by:
National Informatics Centre (CAD Group), Govt. of India, A-Block,
C.G.O. Complex, Lodhi Road, New Delhi 110003, 2003”
www.collabcad.com
REFERENCE BOOKS
1. Bhatt.N.D. and Panchal.V.M., “Machine Drawing”, Charotar Publishing House,
388001, 38th Edition, 2003.
2. P.S.G. Design Data Book
3. Luzadder,Warren.J., and Duff, Jon.M. “Fundamentals of Engineering Drawing”,
Prentice Hall India Pvt. Ltd., Eastern Economy Edition, Eleventh Edition,
41
EQUIPMENT NEEDED ( FOR A BATCH OF 30 STUDENTS)
1. Computer System 30
17” Graphics Terminal
Pentium IV Processor
80 GB HDD
512 MB RAM
Advanced graphics accelerator
2. Laser Printer 01
3. Plotter (A2 size) 01
SOFTWARE
30 seats of latest/recent versions of AutoCAD/CATIA/SOLIDWORKS/SOLID
EDGE/NX/PRO-E/COLLABCAD or equivalent software
ME2257 COMPUTER AIDED MACHINE DRAWING LABORATORY L T P C
0 0 4 2
OBJECTIVE
To make the students understand and interpret drawings of machine components
so as to prepare assembly drawings either manually and using standard CAD
packages.
To familiarize the students with Indian Standards on drawing practices and
standard components.
DRAWING STANDARDS
Code of practice for Engineering Drawing, BIS specifications – Welding symbols, riveted
joints, keys, fasteners – Reference to hand book for the selection of standard
components like bolts, nuts, screws, keys etc.
2-D DRAWINGS
Limits, Fits – Tolerancing of individual dimensions- Specification of Fits- Manual
Preparation of production drawings and reading of part and assembly drawings.
CAD PRACTICE (USING APPLICATION PACKAGES)
Drawing, Editing, Dimensioning, Plotting Commands, Layering Concepts, Hatching,
Detailing, Assembly, basic principles of GD&T (geometric dimensioning & tolerancing)
ASSEMBLY DRAWING (MANUAL & USING APPLICATION PACKAGES)
Manual parts drawing and preparation of assembled views given part details for
components followed by practicing the same using CAD packages.
Suggested Assemblies:
Shaft couplings – Plummer block – Screw jack- Lathe Tailstock – Universal Joint –
Machine Vice – Stuffing box- safety Valves - Non-return valves- Connecting rod -Piston
and crank shaft- Multi plate clutch- Preparation of Bill of materials and tolerance data
sheet L=15, P= 45, TOTAL: 60 PERIODS
Use of standard CAD application packages is recommended from the point of view of
requirement by industries. However to encourage our national efforts in indigenous
development of software packages with focus on open source, students may be
encouraged to work with “CollabCAD Software”, developed by:
National Informatics Centre (CAD Group), Govt. of India, A-Block,
C.G.O. Complex, Lodhi Road, New Delhi 110003, 2003”
www.collabcad.com
REFERENCE BOOKS
1. Bhatt.N.D. and Panchal.V.M., “Machine Drawing”, Charotar Publishing House,
388001, 38th Edition, 2003.
2. P.S.G. Design Data Book
3. Luzadder,Warren.J., and Duff, Jon.M. “Fundamentals of Engineering Drawing”,
Prentice Hall India Pvt. Ltd., Eastern Economy Edition, Eleventh Edition,
41
EQUIPMENT NEEDED ( FOR A BATCH OF 30 STUDENTS)
1. Computer System 30
17” Graphics Terminal
Pentium IV Processor
80 GB HDD
512 MB RAM
Advanced graphics accelerator
2. Laser Printer 01
3. Plotter (A2 size) 01
SOFTWARE
30 seats of latest/recent versions of AutoCAD/CATIA/SOLIDWORKS/SOLID
EDGE/NX/PRO-E/COLLABCAD or equivalent software
No comments:
Post a Comment
Any doubt ??? Just throw it Here...