ME 2253 ENGINEERING MATERIALS AND METALLURGY SYLLABUS | ANNA UNIVERSITY BE AUTOMOBILE ENGINEERING 4TH SEM SYLLABUS REGULATION 2008 2011 2012-2013 BELOW IS THE ANNA UNIVERSITY FOURTH SEMESTER BE AUTOMOBILE ENGINEERING DEPARTMENT SYLLABUS, TEXTBOOKS, REFERENCE BOOKS,EXAM PORTIONS,QUESTION BANK,PREVIOUS YEAR QUESTION PAPERS,MODEL QUESTION PAPERS, CLASS NOTES, IMPORTANT 2 MARKS, 8 MARKS, 16 MARKS TOPICS. IT IS APPLICABLE FOR ALL STUDENTS ADMITTED IN THE YEAR 2011 2012-2013 (ANNA UNIVERSITY CHENNAI,TRICHY,MADURAI,TIRUNELVELI,COIMBATORE), 2008 REGULATION OF ANNA UNIVERSITY CHENNAI AND STUDENTS ADMITTED IN ANNA UNIVERSITY CHENNAI DURING 2009
ME 2253 ENGINEERING MATERIALS AND METALLURGY (Common to Mechanical & Automobile)
L T P C
3 0 0 3
OBJECTIVE
To impart knowledge on the structure, properties, treatment, testing and applications of
metals and non-metallic materials so as to identify and select suitable materials for
various engineering applications.
REVIEW (NOT FOR EXAM):
Crystal structure – BCC, FCC and HCP structure – unit cell – crystallographic planes
and directions, miller indices – crystal imperfections, point, line, planar and volume
defects – Grain size, ASTM grain size number.
UNIT I CONSTITUTION OF ALLOYS AND PHASE DIAGRAMS 9
Constitution of alloys – Solid solutions, substitutional and interstitial – phase diagrams,
Isomorphous, eutectoid, eutectic, peritectic, and peritectroid reactions, Iron – Iron
carbide equilibrium diagram. Classification of steel and cast Iron, microstructure,
properties and applications.
UNIT II HEAT TREATMENT 9
Definition – Full annealing, stress relief, recrystallisation and spheroidizing –normalising,
hardening and tempering of steel. Isothermal transformation diagrams – cooling curves
superimposed on I.T. diagram, CCR - Hardenability, Jominy end quench test –
Austempering, martempering – case hardening - carburising, nitriding, cyaniding,
carbonitriding, flame and induction hardening.
UNIT III MECHANICAL PROPERTIES AND TESTING 9
Mechanism of plastic deformation, slip and twinning – Types of fracture – Testing of
materials under tension, compression and shear loads – Hardness tests (Brinell,
Vickers and Rockwell), Impact test - Izod and Charpy, Fatigue and creep tests, fracture
toughness tests.
UNIT IV FERROUS AND NON FERROUS METALS 9
Effect of alloying elements on steel (Mn, Si, Cr, Mo, V, Ti & W) - stainless and tool
steels – HSLA - maraging steels – Cast Irons - Grey, White malleable, spheroidal –
Graphite, Alloy cast irons, Copper and Copper alloys - Brass, Bronze and Cupronickel –
Aluminum and Al-Cu alloy – precipitation hardening– Bearing alloys.
UNIT V NON-METALLIC MATERIALS 9
Polymers – types of polymer, commodity and engineering polymers – Properties and
applications of PE, PP, PS, PVC, PMMA, PET, PC, PA, ABS, PI, PAI, PPO, PPS,
PEEK, PTFE Polymers – Urea and Phenol Formaldehydes – Engineering Ceramics –
Introduction to Fibre reinforced plastics.
TOTAL: 45 PERIODS
TEXT BOOKS
1. Kenneth G.Budinski and Michael K.Budinski “Engineering Materials” Prentice-Hall of
India Private Limited, 4th Indian Reprint 2002.
36
REFERENCES
1. William D Callister “Material Science and Engineering”, John Wiley and Sons 2007.
2. Raghavan.V “Materials Science and Engineering”, Prentice Hall of India Pvt., Ltd.,
2007.
3. Sydney H.Avner “Introduction to Physical Metallurgy” McGraw Hill Book Company,
2007.
4. Dieter G. E., Mechanical Metallurgy, Mc Graw Hill Book Company, 1988.
5. O.P. Khanna , A text book of Materials Science and Metallurgy, Khanna Publishers,
2003.
6. Vijaya. M.S. and G. Rangarajan, Material Science, Tata McGraw-Hill , 2007
ME 2253 ENGINEERING MATERIALS AND METALLURGY (Common to Mechanical & Automobile)
L T P C
3 0 0 3
OBJECTIVE
To impart knowledge on the structure, properties, treatment, testing and applications of
metals and non-metallic materials so as to identify and select suitable materials for
various engineering applications.
REVIEW (NOT FOR EXAM):
Crystal structure – BCC, FCC and HCP structure – unit cell – crystallographic planes
and directions, miller indices – crystal imperfections, point, line, planar and volume
defects – Grain size, ASTM grain size number.
UNIT I CONSTITUTION OF ALLOYS AND PHASE DIAGRAMS 9
Constitution of alloys – Solid solutions, substitutional and interstitial – phase diagrams,
Isomorphous, eutectoid, eutectic, peritectic, and peritectroid reactions, Iron – Iron
carbide equilibrium diagram. Classification of steel and cast Iron, microstructure,
properties and applications.
UNIT II HEAT TREATMENT 9
Definition – Full annealing, stress relief, recrystallisation and spheroidizing –normalising,
hardening and tempering of steel. Isothermal transformation diagrams – cooling curves
superimposed on I.T. diagram, CCR - Hardenability, Jominy end quench test –
Austempering, martempering – case hardening - carburising, nitriding, cyaniding,
carbonitriding, flame and induction hardening.
UNIT III MECHANICAL PROPERTIES AND TESTING 9
Mechanism of plastic deformation, slip and twinning – Types of fracture – Testing of
materials under tension, compression and shear loads – Hardness tests (Brinell,
Vickers and Rockwell), Impact test - Izod and Charpy, Fatigue and creep tests, fracture
toughness tests.
UNIT IV FERROUS AND NON FERROUS METALS 9
Effect of alloying elements on steel (Mn, Si, Cr, Mo, V, Ti & W) - stainless and tool
steels – HSLA - maraging steels – Cast Irons - Grey, White malleable, spheroidal –
Graphite, Alloy cast irons, Copper and Copper alloys - Brass, Bronze and Cupronickel –
Aluminum and Al-Cu alloy – precipitation hardening– Bearing alloys.
UNIT V NON-METALLIC MATERIALS 9
Polymers – types of polymer, commodity and engineering polymers – Properties and
applications of PE, PP, PS, PVC, PMMA, PET, PC, PA, ABS, PI, PAI, PPO, PPS,
PEEK, PTFE Polymers – Urea and Phenol Formaldehydes – Engineering Ceramics –
Introduction to Fibre reinforced plastics.
TOTAL: 45 PERIODS
TEXT BOOKS
1. Kenneth G.Budinski and Michael K.Budinski “Engineering Materials” Prentice-Hall of
India Private Limited, 4th Indian Reprint 2002.
36
REFERENCES
1. William D Callister “Material Science and Engineering”, John Wiley and Sons 2007.
2. Raghavan.V “Materials Science and Engineering”, Prentice Hall of India Pvt., Ltd.,
2007.
3. Sydney H.Avner “Introduction to Physical Metallurgy” McGraw Hill Book Company,
2007.
4. Dieter G. E., Mechanical Metallurgy, Mc Graw Hill Book Company, 1988.
5. O.P. Khanna , A text book of Materials Science and Metallurgy, Khanna Publishers,
2003.
6. Vijaya. M.S. and G. Rangarajan, Material Science, Tata McGraw-Hill , 2007
No comments:
Post a Comment
Any doubt ??? Just throw it Here...